The Factors Influencing The Built Environment

The Factors Influencing The Built Environment Introduction The proposal assumes the role of a developer presenting to the client. This will help the client to understand the factors influencing the Built Environment (Moxon Street) site. The site would be developed for a Student Accommodation. Though details of the site are not given in the report but an overview of all the factors that would affect the site development, the techniques used, the precautions ought to be taken, etc. It is a general description of how a site will be developed keeping in mind the health, safety welfare and the environmental implications from the development of the site. Section 3 In a built environment it is necessary for the Designer to reduce the health risks that occur from the construction work and also to provide for the safety and welfare to the workers. So Health, Safety and Welfare play an important in the design process. It can be further divided into stages. The Design process which is a benchmark to identify the health risks that arises from the design as well as eliminate the hazardous to a reasonable extent. An onsite register can also be maintained in this regard to show that we have to consider the onsite risks. It would be mandatory for the chemicals contained in the product to be registered under REACH. For Health Hazard the services of a CDM coordinator will be hired and certain components would be assembled off site which would reduce the health hazard on site. The project risk review gateways will be linked to RIBA at the plan of works stages. There is a need for systematic risk assessment and solution will be assessed on the basis of risk control hierarchy. There would be a Red-Amber-Green list which can help the designer to identify and also to negate the hazards and to control risks as far as possible. The Development will have a negative impact on the environment. The Council stipulates that necessary Environment Impact Assessment and Environmental Performance Statement should be part of the development plans. The design should have provisions for natural sunlight, ventilation of air, energy consumption, etc. This should be able to reduce air and noise pollution. This will help the developer to create goodwill for himself as well. There will be ultra low flush toilet which would reduce the use of water. There are certain Risks Assessments which are to be carried out for the health and safety of the employees on site. They would be in respect of- As per the Control of Substance hazardous to health regulation precaution would be taken by a systematic approach. The services of an Agency would be hired for workplace monitoring for harmful dust, vapours, fumes and gases. This would be done as per the Workplace Exposure Limits given by E40. European Union Noise at work regulation would also be considered as per the guidelines- The 1st and 2nd Action Levels are 80dB(A) and 85dB(A) respectively. 1st and 2nd Peak Action Levels of 135dB(C) and 137dB(C) Peak respectively. A Maximum Exposure Level Limit of 87dB(A) and 140dB(C) Peak at the ear will be introduced which includes any hearing protection. There would be due consideration given to Fire Risk assessment of Catering Extract Systems with regards to the guidelines- BSRIA Fire Risk Assessment Catering Extract Ventilation Regulatory Reform Fire Safety Order (RRFSO) 2005 HVCA DW172 Specification for Kitchen Ventilation Systems. Indoor Air Quality Sick Building Syndrome would be identified as this will affect the health of the occupants of the building. This complains could arise from a particular room or floor but could have a lasting impact on all the occupants. Odour Threshold analysis would also be conducted. This is relating to the strange smell i.e., presence of volatile organic compounds in the building that could affect the health to the occupants. The majority of these volatile organic compounds are present in very low concentrations i.e. 0.1-1ppb (parts per billion). Legionella risk Assessments and Asbestos Identification Surveys would be conducted as well. This would be in accordance with the Approved Code of Practice and Guidance L8, Legionnaires disease Approach There would be a Multi discipline approach taken in the risk management in the design process. This will be fruitful because of the vast experience of the Architect, Consultant, Engineer; etc would be integrated right from the design process. Design Implication This all will help us to have a safe and a sound design which would eliminate the hazards to the health and safety of the workers as well as of the occupants. This will also help us to reduce the environmental impact of the built environment. Primary Services Utilities It is necessary to accommodate these services in the early stages of the design process. There should be early checking of availability of these services Early decision on intended location of such services on the site This will ensure that there is a proper plan in place and will also help us to avoid complications in the future. Provisions should be made for- Telecommunications Gas Water Electricity Sewage services If there are issues with the availability of any of these services than a decision can be taken at the early stages of the design process. The Location of these services would be depended as per the acceptable framework provided by RIBA Plan of Work 2007. This will assist the design team to plan, coordinate and also to have a definite approach to the various services. Entry to the building would be given from all the four sides with the main entrance from the front of the building. There can also be distribution and scaling down of different services done by the Designers to meet the needs of our development. The provisions for accessibility and the maintenance of these services would be done at the early stages of the design process. We would hire competent staff which would look after the maintenance of these services with an access given to them on each floor for easy maintenance and repair. The environmental implications of these services would be- Create a sustainable environment for the communities Protect public health by giving safe drinking water, effective sanitation services, etc Safely recycling waste Comply fully with all the environmental legislation These above precautions and approaches will help us to achieve effective management of services with regular maintenance and also providing with a safe environment for the community. The Water extraction will be done by the he liquid ring vacuum pump contains a twin start helical rotor mounted eccentrically in a cylindrical pump casing and is designed to pump liquids or combinations of liquid, air and fine solids through long suction lines, generating suction lifts to up to 8.5m. For the waste Disposal there will be a Site Waste Management Plan (SWMP) in line with the DTI Code of Practice and associated good practice guidance. On completion the new building should be subject to Post Occupancy evaluation. Global Warning The building designs will be based on the UKCIP medium high emission scenario rather than that which is based on historical data. UKCIP predicted that the average temperature in UK will rise by 3.5 degree by 2080, therefore a mixed mode ventilation stems incorporating the passive and mechanical ventilation coupled with high thermal mass and complete solar shading are likely to cope with the effects of the climate change. Mayor of London commissioned a report stating that London is the most susceptible to flooding than any other urban area in the UK. The site is not in the Zone 3 established by the Westminster Council that specifies areas the areas affected during floods. In order to minimise the energy demand of the building we must increase the efficiency in the building envelope, using high efficiency windows, insulation in walls, ceilings and floors will be used. Passive solar building design could also be used. This will minimise energy demand. In order to control emission to water point of water treatment would be used. This improves the quality of water and also reduces the amount of water in circulation. Non-sewage would be used on site which would minimize demand on the local authority. There would be a good thermal insulation system in place this would minimise the emission to air. The ex filtration of warm air would result for 30% of the heat loss through a buildings envelope. A air leakage test would be carried out as well. Renewable Energy Issues Technical- The site will have a- Solar energy technology Heat pumps Energy from waste Co-generation This will help to reduce the impact on the environment. Economic- Initially the cost of the machines would be higher than the conventional equipments but over a period of time there would be a lot of savings due to a decrease in the bills. Social- This will have a positive impact on the occupants and the community. The carbon and the fuel emission would be quiet low. This would sub dued the hazards caused to the health and safety of the people. Range of Sustainable construction technique includes- Wind Solar Wave Biogas Landfill gas Hydro Waste to Energy 84 KW wind generator Double exterior walls with foam insulation Radiant slab heat for excess energy storage Section 4 The Health and Safety at Work Act 1974 describes the risks associated with the construction industry and narrates the specific provision which ought to be taken to negate the danger. The CDM regulation 2007 encourages co ordination and co-operation among the various parties of the project. It works towards making health and safety an integral part of designing and construction. It recognises the hazards in the planning and construction stage of the project and helps to take corrective steps. The construction health, safety and welfare regulation 1996 are a set of rules to protect the health and safety of the people engaged on the site and the people who may be affected by the work. It is a leaflet which describes the regulation and precautions to be taken by the people on the site. The main focus of the Management of the Health and safety at works regulation 1999 is to reduce the damage on the site and to create a action plan for the emergencies. There is a need to comply with the specific regulation of the industry. Works at Heights Regulations 2005 is concerned with the injury that could occur to a employee as a result of a fall. It covers both the internal and the external areas of the building. There is present no height limit. It places duties on the persons who control the work on the site to take necessary care and precaution. Method Statement Site Foundation The site has a mixed structure type up to 30 metres. So mechanical handling is essential. There should be no public access until the construction work is complete. Adequate security is to be provided to see there is no theft or damage to the site. The site will be developed in two phases. Loading/Unloading of materials As the project is conducted in two phases here is sufficient space at the corner of the site for the loading and unloading of materials. This would also give rise to some risks but it would be handled by the experienced staff that operates the machines. Machines Non-maintenance of machine will pose a great threat to the workers engaged in site development. So a good maintenance schedule is needed to reduce the need of replacement. All machines should have the current safety inspection certificate and the person operating it should also be certified. Electrical Equipment There is a need to keep a check on the conditions of the equipments. Weather Condition When there are unsafe a situation arising from the weather conditions the authority is given to the site foreman to take the precaution which is deemed necessary. Individual Safety Clothing Individual safety clothing will be provided on site and it is necessary to wear them at all times. Safety Systems of Work It is divided into three parts It analyses the task at hand Hazards caused to health, safety and welfare Precautions to be taken to eliminate the hazards It is an extension of the Risk assessments and the method statement All this should take place from the planning stage, the design and also on the construction stage. (Example included in the appendix) Site Induction and Training It is the legal responsibility of the employer to provide induction and training relating to the hazards and risk associated to the health and safety of the employees and the contractors. It includes- The scope of work Amenities on the site such as toilet, water, etc Safety rules in place Safety procedures for high risk construction activity PPE required to be worn First aid arrangements on the site Good Site management It is necessary to hire Project Manager for a good site management. They coordinate all design and construction process. They assist the site from the development stage to the actual completion of the site. As the size of the project is reasonable there is a need to hire a Project Manager. Health and Safety Signage site safety signconstruction multi sign 1 Personal Protective Equipment Safety footwear Hard hats High visibility waist coats Goggles Life jackets Safety harness Insulated clothing for adverse climatic condition Mitts Gaiters Checklists is required for the safety of the employees on site It is necessary for-; Scaffolding Powered Access equipments Roof Work Hoists Cranes Fire Hazardous substance Noise, etc. Roles and Responsibility of the various parties under CDM 2007 Clients Competence of the contractors Suitable arrangements for the welfare facilities Provide pre construction information to the designers and contractors Planning Supervisor Assist the client Notify HSE Co ordinate health and safety in regards to design Ensure good communication on the site Prepare and update health and safety file Designers Reduce risk during design To check whether the CDM co coordinator is been appointed Make client aware of his duty Contractor Prepare and develop a written plan Site rules Ensure suitable welfare facilities are provided Ensure proper induction and training is provided to the workers Sub-contractor Manage and monitor own work and also of his workers Train own employees Provide them information Comply with the requirements of the part 4 of the regulations Users Report risks Check competence Co-operate with each other Health and safety Officer Check that health and safety arrangements are made Report any risks Impose fine if there are inadequate arrangements Supply Chain The materials are available in the free market however there are some materials which would be procured locally and some internationally through Wholesale Agency for Environmental friendly materials. International Procurement Reflective coatings and non structures Phase change material High efficiency insulation system Solar heaters Local Procurement Bricks Cement Concrete Pre cast structures Steel Electrical Fittings Elevators Furniture Wood for Flooring, etc. The access of the truck and the delivery of the material would be from the front entrance of the site with a possible provision at the back end of the site for the exit. A temporary warehouse would be constructed at the corner of the site depending on the construction phase. The handling of the material would be done by the employees who are trained beforehand. The eight rules of handling are included in the appendix Sustainability of resources Recycling facilities would be provided for paper and glass and with textile and plastics. Waste minimisation techniques will also be used to reduce waste and it will bifurcate into clean rubble, timber, general chemical waste, etc. Recycled and Eco friendly materials list is provided in the appendix Embodied energy issues We will try to include more renewable materials in the project which has lower embodied energy than non renewable materials. http://www.canadianarchitect.com/asf/perspectives_sustainibility/measures_of_sustainablity/images/images_optimized/eecontent.jpg Concrete produces 1 tonne of carbon dioxide for every tonne manufactured. Waste treatment and management techniques are important for bio degradability of materials at the end of their useful life. The techniques used are- Combustion or gasification Anaerobic digestion Mechanical treatment Biological treatment Modern Method of Construction It includes ready- made walls, floor and roof which are transported and then assembled on the site. They make construction faster. It also includes modular Kitchen, Bathroom, Furniture, etc which are factory fitted and help in reduction of project duration and also on site environmental hazards. The MMC houses are also energy efficient. Because only assembling is done on the site there are fewer accidents and produces less noise and dust. It also has a less impact on the local residents. References (The mentioned sites were accessed on 21st and 22nd of December 2009) Building a Better Quality of Life: a strategy for sustainable construction. DETR (2000) Sustainable Development Action Plan for Education and Skills. Department for Education and Skills (2003). Leadership in Energy and Environmental Design (LEED). US Green Building Council (2001). Environmental Performance Indicators for Sustainable Construction The Movement for Innovation (M4I) Sustainable Construction. Higher Education Partnership for Sustainability (HEPS). (2002) Building Research Establishment Environmental Assessment Method (BREEAM) Building Research Establishment (2002). http://www.cskills.org/supportbusiness/healthsafety/cdmregs/index.aspx http://www.btinternet.com/~kendalhang/hands/INDG220_HS_Construction.pdf http://www.netlawman.co.uk/info/health-safety-work-management.php http://www.admin.ox.ac.uk/safety/0505.shtml http://www.hsa.ie/eng/Sectors/Construction/Safe_System_of_Work_Plan_SSWP/ http://www.hydrostatic-testing-consultants.co.uk/Health%20and%20Safety%20Management%20System/ssp5wacg.htm http://www.bls.gov/oco/ocos005.htm http://www.healthyworkinglives.com/advice/minimising-workplace-risks/ppe.aspx#what http://www.healthandsafety.co.uk/sitesafchecklist.html http://www.processingtalk.com/news/tol/tol102.html http://www.hse.gov.uk/construction/cdm/summary.htm http://earth2tech.com/2009/11/02/venture-firm-nth-power-names-5-next-gen-green-building-materials-to-watch/ http://www.parliament.uk/documents/upload/postpn209.pdf http://www.slrconsulting.com/slr_waste_management.pdf http://www.healthyworkinglives.com/advice/minimising-workplace-risks/occupational-health-surveillance.aspx http://www.futuregate.co.uk/Written_Health_Safety_Policies.html http://www.chas.gov.uk/downloads/appendix2.doc http://www.hcibib.org/bibtoc.cgi?file=bibdata/CHI99-2.bibabstracts=true http://www.admin.cam.ac.uk/offices/environment/guidance/building.html http://portal.acm.org/citation.cfm?id=633292.633466 http://portal.acm.org/citation.cfm?id=632919 http://www.hcibib.org/bibtoc.cgi?file=bibdata/CHI00-2.bibabstracts=true http://www.noiseatwork.info/occupational_hygiene.html http://www.healthandsafetytips.co.uk/News%20Archive/April%202004%20News%20Archive/April%202004%20Consultation%20on%20New%20Noise%20at%20Work%20Regulations.htm http://www.eckeleurope.co.uk/ http://www.noiseatwork.info/monitoring_the_built_environment.html http://www.lda.gov.uk/server.php?show=ConWebDoc.2445viewPage=6 http://www.lda.gov.uk/server.php?show=ConWebDoc.2445setPaginate=No http://answers.yahoo.com/question/index?qid=20070705090343AAtqBfl http://www.admin.cam.ac.uk/offices/environment/guidance/building.html http://www.noiseatwork.info/monitoring_the_built_environment.html http://www.processingtalk.com/news/tol/tol102.html http://community.benchmarkemail.com/users/simonreed/newsletter/Civic-09-14-Editors-Newsletter-30th-July http://www.fife.gov.uk/atoz/index.cfm?fuseaction=advice.displayadviceid=2E4DDB61-FA29-ACC7-48F889880B70CA8D http://www.healthyworkinglives.com/resources/index.aspx http://www.healthyworkinglives.com/advice/minimising-workplace-risks/occupational-health-surveillance.aspx http://www.healthyworkinglives.com/advice/minimising-workplace-risks/occupational-health-surveillance.aspx http://www.healthscotland.com/advancedsearch/index.aspx http://chas.gov.uk/Downloads/Appendix2.dox http://www.worldpumps.com/view/3626/seaquarium-choose-liquivac-liquid-ring-pump/ http://www.filtsep.com/view/3626/seaquarium-choose-liquivac-liquid-ring-pump/ http://news.hse.gov.uk/lau/2009/09/17/health-risks-at-work-do-you-know-yours/ http://www.healthyworkinglives.com/advice/minimising-workplace-risks/HRatW.aspx http://www.masterytech.com/productpage.php?product_id=spmtlmpg http://www.mastery.com/productpage.php?product_id=spmtlmpg_htm http://www.training-classes.com/programs/00/19/1917_material_handling_safe_material_handling.php http://www.futuregate.co.uk/Written_Health_Safety_Policies.html

Nicotine Essay -- Cigarettes Addiction Tobacco Papers

Nicotine Cigarette smoking has been known for years to impair health of smokers and nonsmokers exposed to smoke in various ways such as by damaging the lungs and circulatory system. Nicotine, present in mainstream and sidestream smoke, is believed to be one of the most toxic components of tobacco. In 1994, David Kessler, commissioner of the FDA, launched an attack on tobacco companies, claiming they deliberately increased nicotine levels in cigarettes. Nicotine has been shown in various experiments to induce tolerance in smokers by its effects on the CNS and dopaminergic receptors. David Kessler believes nicotine to be addictive and desires the FDA to regulate nicotine as any drug such as cocaine. If the agency can prove that nicotine is addictive and that the manufacturers of tobacco products have control over the levels of nicotine in their products, the road is open to regulating cigarettes. Although there have been some experiment that disprove nicotines adverse effects, most studies point to nicotine as a very toxic agent. Nicotine is not essential to tobacco products. It is a naturally occurring slightly basic alkaloid with a pyridine and a pyrrolidine ring. It is estimated that the average smoker inhales with each puff, a dose of nicotine equivalent to .1mg nicotine given intravenously. Nicotines pKa is 9. Its half-life is two hours. Nicotine is converted to its metabolites by the P450 enzyme system and by aldehyde oxidases. Nicotine and its metabolites, such as cotinine, Nnitrosomornicotinine (NNN), and 4-(methylnitrosamino)-1-(3-pyridyl)1-butanone (NNK) are toxic to humans. As is shown in P4, many people in the United States smoke. The average mg of nicotine per cigarette has declined in the United States in the1980... ... of Epidemiology.124.633-640(1986). 23.Maritz et al. The Influence of Maternal Nicotine Exposure On the Interalveolar Septal Status of Neonatal Rat Lung.Cell Biology International.18.747-754(1994). 24.Rajini et al. Short-Term Effects of Sidestream Smoke On Respiratory Epithelial Cells of Mice: Cell Kinetics.Experimental and Applied Toxicology.22.405-410. 25.Maritz et al. Nicotine Exposure: Responses of Type II Pneumocytes of Neonatal Rat Pups. American Journal of Pathology.82.124-136(1992) 26.Joad et al. Intrauterine Effects of Sidestream Cigarette Smoke Exposure On Lung Function, Hyperresponsiveness, and Neuroendocrine Cells In Rats.Toxicology and Applied Pharmacology.132.63-71(1994). 27.US Surgeon General(1982) The Health Consequences of Smoking - Cancer.US Public Health Service PHHS.(PHS) 82-50179, US Government Printing Office, Washington, D.C.

Purpose of Art Essay

The quote â€Å"Anyone who says you can’t see a thought simply doesn’t know art† by Wynetka Ann Reynolds. Reynolds is saying in this quote that you need some thinking or imaginations to see or do art. I think, If someone can’t see and figure that out, how can he draw or write music ? . In this quote Reynolds is saying that the purpose of art is thinking, like an imagination, imagination is the true inspiration of art. Without imagination we can’t have art. Also without imagination other items like philosophy itself cannot exist. The Art needs imagination or thinking. Art Should need imagination, for example, young children draws something unexpected, interesting even surprising for old peoples point of view, because they have lot of imaginations. Like they draws about speaking birds, talking dogs, those imaginations will give them more inspiration which eventually led them to be creative. A photographer must imagine what the end result will look like before snap the picture. Writer must imagine what his reader will see or comprehend when they have finished reading the article. Musician, whether creating a musical piece or plying an existing piece, must imagine what the music looks and sound like, and what those who hear it will hear, see and feel. Any form of art MUST involve imagination. Imagination is used in all aspects of life. Every inventor, artist, doctor, architect, â€Å"all people† use imagination. You have to be a creative thinker to produce anything. Which did not exist before It takes vision, imagination and intelligence to implement a new concept. The Artists should use imagination to talk or express their thought. Without imagination art itself cannot exist, it just will be one of copying thing without creativity.

The Effects Of Alcohol On The Drinking Culture Of America

Throughout the eighteen hundreds saloons were the site of rockus drinking, profane drunkards, and unthinking violence. This drinking culture was defined by masculinity and by free flowing alcohol that permeated all throughout America, city to city. The saloons became so popular with working men because it was time they could spend away from their wives and their homes. In Catherine Murdock’s book Domesticating Drink she argues that these elements of saloon culture, exclusivity, inebriety, and violence, were eliminated by the increase in popularity of mixed sex speakeasies, cocktail parties, and the overall domestication of drink. But this conclusion misinterprets the history of alcohol from Prohibition to the present. Although alcohol is now consumed without the exclusively of the past, it has evolved to be over sexualized and associated with a masculine culture of binge drinking over sexualized and domestic violence. The domestication of drink did allow women to integrate int o the drinking culture of America and allowed women to join the drinking population if they choose to drink. Murdock was correct in saying that the exclusivity of the all male saloon culture crumbled in the nineteen teens and onwards into the twenties, thirties, and forties. One of the most important transitions was that alcohol became far more prevalent in the household setting (165). The rise of cocktail parties gave women an opportunity to drink that was â€Å"softened-feminized enough to remove its mostShow MoreRelated Alcohol and its effects Essay1479 Words   |  6 Pages Alcohol is a large part of American culture. All over the United States drinking is not only acceptable but a social norm from teenagers to adults. This is not only the case in the U.S., but all over the world, where some drinking ages are 18 and 19 years of age. In America specifically, alcohol has been around for centuries and is a large part of many social gatherings. Although this is the case now, in th e early 1900’s during the prohibition period, all alcohol was banned and deemed illegal toRead MoreDrinking Culture and American Social Norms1318 Words   |  6 PagesSPEECH #3 – PERSUASIVE SPEECH Name: DANIEL C. DILIGENT Title: Lowering the Legal Drinking Age Specific Purpose: To argue in favor of lowering the minimum legal drinking age in the United States. Thesis Statement: I will discuss 1) the current legal drinking age, 2) the effect that this drinking age has upon American social norms, and 3) the potential benefits of a lower drinking age. I. INTRODUCTION A. Hook: Alcohol is ever-present in today’s American society. Television viewers are constantly bombardedRead More Drugs and Alcohol Essay1107 Words   |  5 Pages Drugs and Alcohol For nearly 85 years, the government has prohibited pscychoactive drugs. American leaders attempted to do the same to alcohol with Prohibition in the 1920?s. In any society, drug use plays a part in the people?s culture. Whether it be a native taking hallucinogens for a religious ceremony, a destitute alcoholic drinking on a city street, or a group of teenagers smoking marijuana, drugs and alcohol have the same effects in any culture. The question of ?why do people use drugs? hasRead MoreAlcohol And Its Effects On Psychological And Physical Levels1212 Words   |  5 PagesAlcohol is integrated into every part of American society, from the media to basic social interaction. Alcohol is so ingrained into culture that it has become an indication of status, a declaration of membership, a gender-based choice, and a rite of passage (SIRC, 2014). Adolescents growing up in an environment in which alcohol is so prevalent are bound to experiment, and this has become an expectation. However, dri nking impacts minors negatively on psychological and physical levels, and early useRead MoreAlcohol Is The Biggest Killer Of Young People1566 Words   |  7 Pagesoften associated with Russian culture, Guinness dark stout beer is the drink often associated with Irish culture. This culture is often known for heavy drinking and friendly pubs. Irish whiskey such as Jameson is proudly consumed and exported. Alcohol is the biggest killer of young people in Ireland and many are impacted by their parents drinking. One person dies every seven hours due to alcohol in Ireland. Nine out of ten public order crimes in Ireland are alcohol related and one tenth of the healthRead MoreThe Drinking Age Of 211520 Words   |  7 PagesThe drinking age in America should be lowered from 21 to 18. At 18, someone in America is legally considered an adult, and they can indulge in things that are potentially far more harmful than alcohol. Under certain circumstances, alcohol has already been permitted for people under the age of 21. Furthermore, the drinking age of 21 is ineffective because people between the ages of 18 to 21 are still drinking regardless. However, this drinking often takes the shape of dangerous binge drinking. ManyRead MoreProhibition and the Effect on America756 Words   |  3 Pagescontrol alcoholism in America. I chose to do prohibition because the fact that the action taken by the federal government in order to form a better society has led to an explosion of criminal offences in the past as well as today. The effects of prohibition consistently offer a hand in the shaping of American culture. Full-fledged black markets and organized crime groups both offset the supposed benefits of prohibition. Today, teenagers often turn to the underage consumption of alcohol to make them seemRead MoreThe Causes of Prohibition (America 1920s)848 Words   |  4 PagesWhy was prohibition introduced in America in the 1920? When federal prohibition was introduced in America with the 18th Amendment to the constitution in 1919 and the Volstead Act in 1920, it was often termed ‘The Nobel Experiment’. It didn’t take long for most people to recognise that the experiment had gone terribly wrong and that it was fostering what it was supposed to eradicate, crime, excess and corruption. But the question is why it was introduced in America in 1920 and to understand this issueRead More absolut Failure Essay1685 Words   |  7 Pagesimplemented to eliminate the use of alcohol in the United States. In doing this, the advocates of prohibition hoped to also eradicate the social problems associated with alcohol. â€Å"It was an attempt to promote Protestant middle-class culture as a means of imposing order on a disorderly world†(Dumenil 226). However, this goal of keeping social order through not consuming alcohol, was not reached during the years of prohibition, or even the years following it. Alcohol use among Americans did decline, butRead MoreLowering the Drinking Age to 18 May Help Reduce Binge Drinking1072 Words   |  5 PagesThe debate of the drinking age has been long discussed throughout America. The drinking age has been 21 for the last 22 years, and people around the country have wondered weather or not this was the right call. People say that 18 year olds may not be mature enough to drink alcohol and might not know when to stop. It isn’t that teenagers don’t know how to stop, but rather have not been properly taught when enough has been consumed or how to drink responsibly. Changing the drinking age from 21 to